HI8011-60W AKTIVATECH Gigabit PoE Injector Mode A/B, 1x 10/100/1000M 60W PSE TX + 1x 10/100/1000M TX
- 60 Watts, selectable Mode A and Mode B
- Industrial Gigabit PoE Injector with Power Booster
- Accept 48-56VDC for 60/72 Watts application
- 1x Gigabit 60W TX PSE + 1x Gigabit TX
- Operating temp.: -40°C to +75°C Wide Range Temperature
- DIN-Rail, Wall Mount
Specifications:
|
IEEE Standard |
IEEE 802.3 10Base-T Ethernet IEEE 802.3af for PoE IEEE 802.3at for PoE+ |
|
|
Network Connector |
1 x RJ-45 10/100/1000BaseT(X) Data 1 x RJ-45 10/100/1000BaseT(X) PSE Output power |
|
|
Network Cable |
UTP/STP above Cat.5e Cable |
|
|
EIA/TIA-568 10-ohm (100m) |
||
|
Protocol |
CSMA/CD |
|
|
LED |
PW1 (Green): ON－Power is detected PW2 (Green): ON－Power is detected Mode A (Green): ON－End Span PD detected Mode B (Green): ON－Mid Span PD detected 4 Pair (Amber): ON－60W PSE is in active mode OFF－30W PSE is in active mode |
|
|
PoE Pin Assignment |
Default: Mode A (End-Span) V+, V+, V-, V- for pin 1, 2, 3, 6 DIP switch setting can be changed to Mode B (Mid-Span) V+, V+, V-, V- for pin 4, 5, 7, 8 |
|
|
DIP Switch |
DIP1: ON－4 pair (60/72Watts) (default) OFF－2 pair (30/36Watts) DIP2: ON－Mode B Mid-Span OFF－Mode A End-Span (default) DIP3: ON－IEEE802.3at 30W OFF－High power 36W (default) DIP4: Reserved |
|
|
Reverse Polarity Protection |
Present |
|
|
Overload Current Protection |
Present |
|
|
Power Supply |
Redundant power source, 48-56VDC Power Input |
|
|
Power Consumption |
1 W@48 VDC full load, Without PoE |
|
|
PoE Power |
Maximum PoE power 72watts at 48VDC input |
|
Removable Terminal Block |
Provide 4 pin terminal block Wire range: 0.34mm^2 to 2.5mm^2 Solid wire (AWG):12-24/14-22 Stranded wire (AWG): 12-24/14-22 Torque:5lb-In/0.5Nm/0.56Nm Wire Strip length: 7-8mm |
|
Operating Temperature |
-40°C to 75°C |
|
Operating Humidity |
5% to 95% (Non-condensing) |
|
Storage Temperature |
-40°C to 85°C |
|
MTBF (mean time between failure) |
>500,000 hrs (MIL-HDBK-217F) at 25°C |
|
Housing |
Rugged Aluminum, IP30 Protection |
|
Case Dimension (LxWxD)mm |
103.5 x 32 x 81.5 mm (LxWxD) |
|
Installation |
DIN Rail and Wall Mount options included |
|
Certifications: |
|
|
UL 60950-1 |
|
|
Safety |
LVD (EN62368-1) |
|
EMC/EMS |
CE, FCC, VCCI, EN55032/35 |
|
Vibration |
EN 60068-2-6 |
|
Shock |
EN 60068-2-27 |
|
Free Fall |
EN 60068-2-32 |